Wenzhou Mingwei Automation System Co., Ltd.
Main products:Switching power supply, LED driver, DC-DC converter (The products which output DC voltage is more than 36V are limited to be sold to foreign country)
Products
Contact Us
  • Contact Person : Mr. HU RORY
  • Company Name : Wenzhou Mingwei Automation System Co., Ltd.
  • Tel : 86-577-62738001
  • Fax : 86-577-62738002
  • Address : Zhejiang,Wenzhou,No.143 Xinguang Road, Xinguang Industrial Zone, Liushi
  • Country/Region : China
  • Zip : 325604

25W Switching Power Supply S-25 Series

25W Switching Power Supply S-25 Series
Product Detailed
25W Switching Power Supply S-25 1.INPUT:85 ~ 264VAC 2.CE RoHS Approved 3.DIMENSION: 99*97*36mm (L*W*H) 4.1 Years Warranty

25W Single Output Switching Power Supply S-25

Features:

Universal AC input / Full rangeProtections:Short circuit/Over load/Over voltageCooling by free air convection100% full load burn-in testFixed switching frequency at 56KHz1 years warranty

   

SPECIFICATION:

 

MODELS-25-5S-25-12S-25-15S-25-24
OUTPUTDC VOLTAGE 5V12V15V24V
RATED CURRENT5A2.1A1.7A1.1A
CURRENT RANGE0 ~ 5A0 ~ 2.1A0 ~ 1.7A0 ~ 1.1A
RATED POWER25W25.2W25.5W26.4W
RIPPLE & NOISE (max.) Note.250mVp-p100mVp-p100mVp-p100mVp-p
VOLTAGE ADJ. RANGE4.75 ~ 5.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±1.0%±0.5%±0.5%±0.5%
SETUP, RISE TIME300ms, 50ms/230VAC        800ms, 50ms/115VAC at full load
HOLD TIME(TYP.) 90ms/230VAC      12ms/115VAC at full load
INPUTVOLTAGE RANGE85 ~ 264VAC     120 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)72%/115VAC76%/115VAC77%/115VAC80%115VAC
AC CURRENT(Typ.)0.6A/115VAC      0.35A/230VAC
INRUSH CURRENT(max.)COLD START 13A/115VAC           25A/230VAC
LEAKAGE CURRENT<0.75mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE 5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC , 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)SAFETY STANDARDSDesign refer to UL1012, TUV EN60950-1 
WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A
OTHERSMTBF330.8K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION99*97*36mm (L*W*H)
PACKING0.33Kg; 60pcs/21.94Kg/0.0326CMB
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Mechanical Specification: 



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.