15W Switching Power Supply S-15 Series

15W Switching Power Supply S-15 1.INPUT:110V or 220V 2.CE RoHS Approved 3.DIMENSION: 99*97*36mm (L*W*H) 4.1 Year Warranty

15W Single Output Switching Power Supply S-15 Series

 

Features:

AC input range selected by switchProtections:Short circuit/Over loadCooling by free air convection100% full load burn-inFixed switching frequency at 37KHzLost costHigh reliability1 year warranty

S-15 SPECIFICATION:

 

MODEL	S-15-5	S-15-12	S-15-24
DC VOLTAGE	5V	12V	24V
RATED CURRENT	3A	1.3A	0.7A
CURRENT RANGE	0 ~ 3A	0 ~ 1.3A	0 ~ 0.7A
RATED POWER	15W	15.6W	16.8W
RIPPLE & NOISE (max.) Note.2	50mVp-p	50mVp-p	100mVp-p
VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.5%
LOAD REGULATION	±1.0%	±0.5%	±0.5%
SETUP, RISE, HOLD TIME	200ms, 100ms, 30ms at full load
VOLTAGE RANGE	85 ~ 132VAC / 170 ~ 264VAC selected by switch          240 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	65%	68%	72%
AC CURRENT	0.5A/115VAC 0.25A/230VAC
INRUSH CURRENT (max.)	COLD START 15A/115VAC 30A/230VAC
LEAKAGE CURRENT	<0.5mA/240VAC
OVERLOAD	105 ~ 135% rated output power
	Protection type : Constant current limiting, recovers automatically after fault condition is reoved
WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC ,10 ~ 95% RH
TEMP. COEFFICIENT	±0.02%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS	Design refer to UL1012
WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Design refer to FCC Part15 J Conduction Class B
MTBF	522.1K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	99*97*36mm (L*W*H)
PACKING	0.30Kg; 60pcs/19.84Kg/0.0326CBM
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.