Switching Power Supply With PFC Function

1) Switching Power Supply With PFC Function 2) MODEL: SP-150 3) INPUT:100 ~ 240VAC 4) CE RoHS Approved 5) SIZE:179*99*45mm

Switching Power Supply With PFC Function SP-150

1) Features:

Universal AC input / full rangeBuilt-in active PFC function, PF>0.93Protections:Short circuit/Over load/Over voltage/Over temperatureBuilt-in constant current limiting circuitRemote ON-OFF control(Optional)LED indicator for power on100% full load burn-in testFixed switching frequency at PFC:67KHz  PWM:134KHz1 year warranty

2) Switching Power Supply With PFC Function SP-150 Specification:

MODEL		SP-150-3.3	SP-150-5	SP-150-7.5	SP-150-12	SP-150-13.5	SP-150-15	SP-150-24	SP-150-27	SP-150-48
OUTPUT	DC VOLTAGE	3.3V	5V	7.5V	12V	13.5V	15V	24V	27V	48V
	RATED CURRENT	30A	30A	20A	12.5A	11.2A	10A	6.3A	5.6A	3.2A
	CURRENT RANGE	0 ~ 30A	0 ~ 30A	0 ~ 20A	0 ~ 12.5A	0 ~ 11.2A	0 ~ 10A	0 ~ 6.3A	0 ~ 5.6A	0 ~ 3.2A
	RATED POWER	99W	150W	150W	150W	151.2W	150W	150W	151.2W	153.6W
	RIPPLE & NOISE (max.) Note.2	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	150mVp-p	150mVp-p	250mVp-p
	VOLTAGE ADJ. RANGE	3.14 ~ 3.63V	4.75 ~ 5.5V	7.13 ~ 8.25V	11.4 ~ 13.2V	12.8 ~ 14.9V	14.3 ~ 16.5V	22.8 ~ 26.4V	25.7 ~ 29.7V	45.6 ~ 52.8V
	VOLTAGE TOLERANCE Note.3	±2.0%	±2.0%	±2.0%	±2.0%	±2.0%	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE, HOLD TIME	600ms, 30ms, 20ms at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC        120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.93/230VAC      PF>0.98/115VAC at full load
	EFFICIENCY (Typ.)	67%	75%	79%	80%	80%	81%	83%	84%	84%
	AC CURRENT(Typ.)	2.5A/115VAC          1.2A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 40A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type: Constant current limiting, recovers auto matically after fault condition is removed
	OVER VOLTAGE	3.63 ~ 4.46V	5.5 ~ 6.75V	8.25 ~ 10.13V	13.2 ~ 16.2V	14.85 ~ 18.23V	16.5 ~ 20.25V	26.4 ~ 32.4V	29.7 ~ 36.45V	52.8 ~ 64.8V
		Protection type: Shut down o/p voltage, re-power on to recover
FUNCTION	REMOTE CONTROL (OPTION)	CN1: 4 ~10VDC POWER ON, <0 ~ 0.8VDC POWER OFF
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.05%/ºC (0 ~ 50ºC)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC(Note4)	SAFETY STANDARDS	Design refer to UL60950-1, TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P: 3KVAC  I/P-FG: 1.5KVAC  O/P-FG: 0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022(CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11;EN50204,EN55024,Light industry level, criteria A
OTHERS	MTBF	211.3K hrs min. MIL-HDBK-217F (25ºC)
	DIMENSION	179*99*45mm (L*W*H)
	PACKING	0.578Kg; 30pcs/19.24Kg/0.0250CBM
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.5. derating may be needed under low input voltages.Plase check the derating curve for more details.

3) Mechanical Specification:

4) Production Capacity & Quality Control:

5) Switching Power Supply With PFC Function SP-150 LVD Certificate:

6) EMC Certificate: